www.rossmax.com
Model: WF262
OBM_IB_WF262_
EN_SW_ver2232
INSWF262000000011
Warranty Card
This instrument is covered by a 2 year guarantee from the
date of purchase, batteries and accessories are not included.
The guarantee is valid only on presentation of the warranty
card completed or stamped by the seller/dealer confirm-
ing date of purchase or the receipt. Opening or altering the
instrument invalidates the guarantee. The guarantee does
not cover damage, accidents or non-compliance with the
instruction manual. Please contact your local seller/dealer or
buying source or www.rossmax.com.
Customer Name: ________________________________
Address: _______________________________________
Telephone: ______________________________________
E-mail address: __________________________________
Product Information
Date of purchase: _______________________________
Store where purchased:
________________________________________________
Manufacturer: Rossmax Swiss GmbH,
Widnauerstrasse 1, CH-9435 Heerbrugg, Switzerland
www.rossmax.com
Pairing the device with your Smartphone for rst time use.
Please visit the website at www.rossmax.com for the initial
set-up instructions.
1. Download and install the applicable APP onto your
smartphone.
2. Set up your personal data on the APP.
3. Turn Bluetooth and the APP of smartphone on, and fol-
low the setup and pairing instructions.
4. The Bluetooth symbol ( ) will illuminate on the display
that indicates the pairing is done.
• If the pairing is successful, once the measurement is
done, the current measured reading will automatically
be transferred to the APP and your measured values will
also be shown on the APP at the same time.
• If the pairing has failed, the symbol will be shown on
the display, and the current measured values will not au-
tomatically be transferred to the APP. Please re-pair this
device with your smartphone.
• Clean the scale only by using a slightly damp cloth.
• Do not use solvents or abrasive cleaning agents.
• Do not submerge the scale under water.
• Store the scale in a dry location and keep it horizontal.
• Do not expose the scale to direct sunlight.
• Place the unit gently and avoid strong shocks, such as
dropping the unit on the oor.
Capacity x Graduation 5-150kg x 100g
Accuracy 50kg ± 0.4kg; 100kg ± 0.5kg;
150kg ± 0.6kg
Display resolution Body fat/Body muscle: 0.1%
Body fat 5-80% ±2
Body muscle 25-90% ±2
Measurement unit
Kg/lb/
Dimensions Approx. 300 x 270 x 22mm
Batteries AAA*3
Auto-on value 5-15Kg
Operation condition 5-40°C, ≤85%RH, 80 - 106kPa
Storage condition -20-55°C, ≤90%RH, 50 - 106kPa
Error
messages
Possible causes Correction
No display
appears
Battery at or no
battery.
Replace the batteries
with the intended type
(3 x AAA).
Battery is not in-
stalled or inserted
properly.
Re-insert the batteries
in the correct positions.
The weight is
less than auto-on
value.
Step on the scale or
press it hard to meet
auto-on value (5-15kg).
Low battery.
Replace the batteries
with the intended type
(3 x AAA).
The weight value
is above the meas-
urement range.
The maximum meas-
urement capacity is
150 kg. Please remove
the critical load to
avoid load cell damage.
Measurement
error.
Please follow the meas-
urement steps and try
again.
Data transmit
failure.
Connect this device
with your smartphone
and transfer again.
Data Transfer via Bluetooth
Care and Maintenance
Technical Data
Error Messages and Troubleshooting
Data Transfer via Bluetooth
Please download and install
the free Healthstyle APP onto
your smartphone
Healthstyle APP
APP
45 kg
APP
45 kg
Bluetooth Body Fat Scale
Step 4
The measured reading (weight) will blink twice and
lock on LCD display. Check your measured values
(body weight, body fat in %, muscle in %, visceral fat
level, BMR and BMI) from the APP.
Note:
1. Before 0.0 kg appears, please don’t step on the monitor.
Without further activity the monitor will automatically
power-o in 15 seconds.
2. Unpairing your device will not delete the data from the
APP.
3. If you re-pair your smartphone with the device, all prior
reading history stored on the phone APP will be re-
tained.
4. Bluetooth data transfer will reduce the battery capacity.
5. Electromagnetic interference: Avoid strong electrical or
electromagnetic elds in the direct vicinity of the de-
vice.
1. The unit switch button is located at the bottom of the
scale.
2. Press the unit switch button to select your desired unit
from “kg” (kilo gram) to “lb” (pound) or to “公斤” (kilo
gram) when the monitor displays “0.0”.
Unit Switch
Step 1
Firm and
at oor
Put the scale on the rm and
at oor, avoid cushioned oor
surface such as a carpet or mat.
Please refer to “Data Transfer via
Bluetooth” section for rst time
use.
Step 2
Turn the APP of smartphone on,
step on the scale gently, it will
turn on automatically. The LCD
display will show 0.0 kg(lb) and
Bluetooth symbol. The Bluetooth
symbol ( ) will illuminate on
the display after successful
connection with smartphone,
if not, will illuminate,
the subsequent measured
readings (max. 10 readings)
will be temporarily stored in
the device and transmitted to
APP automatically until next
successful connection.
Step 3
Step onto measurement
platform carefully with bare feet
on the electrodes (stainless steel
area) of the monitor and remain
stationary until the measured
reading stop ashing after
completion of the measurement.
How to Take a Measurement
WARNING: The symbol on this product means that it's an elec-
tronic product and following the European directive 2012/19/EU
the electronic products have to be disposed on your local recy-
cling centre for safe treatment.
Loading page 2...
